הצורב שלי עושה לי צרות לאחרונה(Nec 3520).
עדכנתי Firmware,תוכנת צריבה ודיסקים,אבל עדיין צריבת DVD לא עובדת כראוי.
אני חושב שהבעיה תוכנתית(שגיאת PMA),ונראה לי שפגע בי וירוס.
האם יש תוכנה כלשהי,שמאפשרת לבדוק את תקינות הצורב?
בתודה מראש,
יוחאי.

Windows
Windows
1C82-0000-19E5-MAAX-4002-8186-****

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 17/07/2002 09:20:56
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 12:54:32

NT-SPTI used
Nero Version: 7.5.9.0
Internal Version: 7, 5, 9, 0
(Nero Express)
Recorder: <_NEC DVD_RW ND-3520AW> Version: 3.07 - HA 1 TA 1 - 7.5.9.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <_NEC DVD_RW ND-3520AW>Version: 3.07 - HA 1 TA 1 - 7.5.9.0
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : SiImage Si3114r5 Port 0 ID 16 DMA: Off
OtherPeripheral : SI Pseudo Device 0000 Si3114r5 Port 0 ID 16 DMA: Off
CdRomPeripheral : HL-DT-ST DVD-ROM GDR8163B nvatabus Port 1 ID 0 DMA: Off
CdRomPeripheral : _NEC DVD_RW ND-3520AW nvatabus Port 1 ID 2 DMA: Off
DiskPeripheral : WDC WD1600JD-22HBB0 nvatabus Port 2 ID 0 DMA: Off
CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 4 ID 0 DMA: Off

=== CDRom-Device-Map ===
HL-DT-ST DVD-ROM GDR8163B F: CDRom0
_NEC DVD_RW ND-3520AW G: CDRom1
AXV CD/DVD-ROM H: CDRom2
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1023MB (1048044kB)
Free physical memory: 620MB (635144kB)
Memory in use : 39 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

25.11.2006
===== Disc-Copy over image - 1st step : Copy to image ...

19:20:13 #1 Text 0 File SCSIPTICommands.cpp, Line 411
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

19:20:14 #2 Text 0 File SCSIPTICommands.cpp, Line 209
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

19:20:14 #3 Text 0 File DVDCopy.cpp, Line 319
DVD Track-Information from source disc:
Media Type: DVD-R
S01 T01 Con 0x14 Start 0 Len 736 NWA -1 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)
S01 T02 Con 0x14 Start 752 Len 48 NWA -1 (gap 16) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)
S01 T03 Con 0x14 Start 816 Len 2068544 NWA -1 (gap 16) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)

19:20:14 #4 Text 0 File DVDCopy.cpp, Line 434
Max -1 tracks of 3 allowed to copy
1: 0 - 736 = 736, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)
2: 752 - 800 = 48, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)
3: 816 - 2069360 = 2068544, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)

19:20:14 #5 Text 0 File Burncd.cpp, Line 3451
Turn on Track-At-Once, using DVD-R/RW media

19:20:14 #6 Text 0 File DlgWaitCD.cpp, Line 306
Last possible write address on media: 2621439 (582:32.39, 5119MB)
Last address to be written: 2069359 (459:51.34, 4041MB)

19:20:14 #7 Text 0 File DlgWaitCD.cpp, Line 318
Write in overburning mode: NO (enabled: CD)

19:20:14 #8 Text 0 File DlgWaitCD.cpp, Line 490
>>> Protocol of DlgWaitCD activities: <<<
=========================================

19:20:14 #9 Text 0 File ThreadedTransferInterface.cpp, Line 821
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Data (mode 1))
2 indices, index0 (150) not provided
original disc pos #0 + 752 (752) = #752/0:10.2
not relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 752 blocks [Image Recorder]
1: TRM_DATA_MODE1 (2 - Data (mode 1))
2 indices, index0 (0) not provided
original disc pos #752 + 64 (64) = #816/0:10.66
not relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 64 blocks [Image Recorder]
2: TRM_DATA_MODE1 (3 - Data (mode 1))
2 indices, index0 (0) not provided
original disc pos #816 + 2068544 (2068544) = #2069360/459:51.35
not relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2068544 blocks [Image Recorder]
--------------------------------------------------------------

19:20:14 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1024
Prepare [Image Recorder] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 3: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1540096, ISRC ""
2: TRM_DATA_MODE1, 2048/0x00, FilePos 1540096 1540096 1671168, ISRC ""
3: TRM_DATA_MODE1, 2048/0x00, FilePos 1671168 1671168 4238049280, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|__ ____NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 752 | 752 | 0x00
0 | 1 | 1 | 0x41 | 752 | 752 | 0x00
752 | 2 | 0 | 0x41 | 64 | 816 | 0x00
752 | 2 | 1 | 0x41 | 64 | 816 | 0x00
816 | 3 | 0 | 0x41 | 2068544 | 2069360 | 0x00
816 | 3 | 1 | 0x41 | 2068544 | 2069360 | 0x00
2069360 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

19:20:14 #11 Phase 120 File dlgbrnst.cpp, Line 1746
Creating the image for burning

19:20:14 #12 Text 0 File ThreadedTransferInterface.cpp, Line 2743
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

19:20:15 #13 Text 0 File ThreadedTransferInterface.cpp, Line 2743
Verifying disc position of item 1 (not relocatable, no disc pos, no patch infos, orig at #752): write at #752

19:20:15 #14 Text 0 File ThreadedTransferInterface.cpp, Line 2743
Verifying disc position of item 2 (not relocatable, no disc pos, no patch infos, orig at #816): write at #816

19:25:17 #15 Phase 121 File dlgbrnst.cpp, Line 1746
Creating Image completed successfully

19:25:19 #16 Text 0 File SCSIPTICommands.cpp, Line 254
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

19:25:19 #17 Text 0 File SCSIPTICommands.cpp, Line 411
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

19:25:19 #18 Text 0 File Cdrdrv.cpp, Line 10467
DriveLocker: UnLockVolume completed



===== Disc-Copy over image - 2nd step : Burn the image ...

19:25:23 #1 Text 0 File SCSIPTICommands.cpp, Line 411
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

19:25:23 #2 IMAGEGEN -10 File ImageGen.cpp, Line 366
Image was written as TAO.
MTYP: Mediumtype = DVD-R/RW (0x6)
Image file name: <D:\My Documents\TempImage.nrg>

19:25:24 #3 Text 0 File Burncd.cpp, Line 3451
Turn on Track-At-Once, using DVD-R/RW media

19:25:57 #4 Text 0 File DlgWaitCD.cpp, Line 306
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2069359 (459:51.34, 4041MB)

19:25:57 #5 Text 0 File DlgWaitCD.cpp, Line 318
Write in overburning mode: NO (enabled: CD)

19:25:57 #6 Text 0 File DlgWaitCD.cpp, Line 2903
Recorder: _NEC DVD_RW ND-3520AW, Media type: DVD-R
Disc Manufacturer: MCC 03 - RG20
Disc Application Code: 64, Disc Physical Code: 193

19:25:57 #7 Text 0 File DlgWaitCD.cpp, Line 490
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD-R/RW.)

19:25:57 #8 Text 0 File ThreadedTransferInterface.cpp, Line 821
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - DVD-ROM)
2 indices, index0 (150) not provided
original disc pos #0 + 752 (752) = #752/0:10.2
not relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 736 blocks [G: _NEC DVD_RW ND-3520AW]
1: TRM_DATA_MODE1 (2 - DVD-ROM)
2 indices, index0 (0) not provided
original disc pos #752 + 64 (64) = #816/0:10.66
not relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 48 blocks [G: _NEC DVD_RW ND-3520AW]
2: TRM_DATA_MODE1 (3 - DVD-ROM)
2 indices, index0 (0) not provided
original disc pos #816 + 2068544 (2068544) = #2069360/459:51.35
not relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2068544 blocks [G: _NEC DVD_RW ND-3520AW]
--------------------------------------------------------------

19:25:57 #9 Text 0 File ThreadedTransferInterface.cpp, Line 1024
Prepare [G: _NEC DVD_RW ND-3520AW] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 3: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1540096, ISRC ""
2: TRM_DATA_MODE1, 2048/0x00, FilePos 1540096 1540096 1671168, ISRC ""
3: TRM_DATA_MODE1, 2048/0x00, FilePos 1671168 1671168 4238049280, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|__ ____NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 752 | 752 | 0x00
0 | 1 | 1 | 0x41 | 752 | 752 | 0x00
752 | 2 | 0 | 0x41 | 64 | 816 | 0x00
752 | 2 | 1 | 0x41 | 64 | 816 | 0x00
816 | 3 | 0 | 0x41 | 2068544 | 2069360 | 0x00
816 | 3 | 1 | 0x41 | 2068544 | 2069360 | 0x00
2069360 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

19:25:57 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1095
Removed 16 run-out blocks from end of track 1. Length: 752 -> 736.

19:25:57 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1095
Removed 16 run-out blocks from end of track 2. Length: 64 -> 48.

19:25:57 #12 Text 0 File SCSIPTICommands.cpp, Line 209
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

19:25:57 #13 Phase 36 File dlgbrnst.cpp, Line 1746
Burn process started at 16x (22,160 KB/s)

19:25:57 #14 Text 0 File ThreadedTransferInterface.cpp, Line 2743
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

19:25:57 #15 Text 0 File DVDR.cpp, Line 3058
Recording mode: Sequential Recording Mode for Multisession

19:25:57 #16 Text 0 File DVDR.cpp, Line 3214
Start write address at LBA 0
DVD high compatibility mode: No

19:25:57 #17 Text 0 File Cdrdrv.cpp, Line 9234
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

19:26:58 #18 Text 0 File DVDMinusRW.cpp, Line 611
EndTrack 1: Last written address was 735

19:26:59 #19 Text 0 File ThreadedTransferInterface.cpp, Line 2743
Verifying disc position of item 1 (not relocatable, no disc pos, no patch infos, orig at #752): write at #752

19:27:00 #20 Text 0 File DVDR.cpp, Line 3058
Recording mode: Sequential Recording Mode for Multisession

19:27:00 #21 Text 0 File DVDR.cpp, Line 3214
Start write address at LBA 752
DVD high compatibility mode: No

19:27:00 #22 Text 0 File Cdrdrv.cpp, Line 9234
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

19:27:37 #23 SPTI -1194 File SCSIPassThrough.cpp, Line 179
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1194)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x04
CDB Data: 0x00 00 00 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 73 04

19:27:38 #24 Text 0 File DVDMinusRW.cpp, Line 611
EndTrack 2: Last written address was 799, reserved+blank track

19:27:38 #25 CDR -1194 File ThreadedTransferInterface.cpp, Line 2119
PMA update failure
G: _NEC DVD_RW ND-3520AW

19:27:38 #26 TRANSFER -18 File ThreadedTransferInterface.cpp, Line 2119
Could not perform EndTrack

19:27:38 #27 Phase 38 File dlgbrnst.cpp, Line 1746
Burn process failed at 16x (22,160 KB/s)

19:27:39 #28 Text 0 File SCSIPTICommands.cpp, Line 254
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

19:27:43 #29 Text 0 File Cdrdrv.cpp, Line 10467
DriveLocker: UnLockVolume completed

19:27:43 #30 Text 0 File SCSIPTICommands.cpp, Line 411
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 25/08/2006 05:47:00
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 17/07/2002 08:53:02
File 'Drivers\PXHELP20.SYS': Ver=3.00.33a, size=36528 bytes, created 25/08/2006 05:47:00 (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

אני צריך לדעת ,לפני שאני לוקח את הצורב לתיקון.
אני חושב שהבעיה היא תוכנתית,אבל לא בטוח(קובץ ה-Log לא אומר לי כלום......)
בתודה מראש,
יוחאי.

נסה שתי מדיות מסוגים שונים, על שני מחשבים שונים, פעם עם תוכנה צד שלישי ופעם
עם הצריבה המובנית של WindowsXP ואז סביר שתדע אם הוא תקין/לא תקין.

אם יש לך אחריות - הסתדרת, אם אין - תקנה חדש, לא מתקנים כאלה דברים.

כי יש לי גם בעיה פתאומית בתצוגה של דפי אינטרנט(הטקסט נהייה ענקי פתאום).
לאחר שחזור ה-Theme של XP,חלק מדפי האינטרנט הסתדרו,אך חלק לא.
בתודה מראש,
יוחאי.

אני בספק, אבל הכל יכול להיות.
לכן בודקים על שני מחשבים שונים (תקינים ככל שניתן להתרשם), אם יש.